Overview

Product Model: S020090-SM16703RGB.  

Voltage: DC12V. 

Power: 21.6W/M, 

IC Model: SM16703  

Display grayscale level: 256. 

Lamp beads: 5050RGB  

Pixel point: 30Pixels/M, 

Number of LEDs:90LEDS/M 

PCB width:20mm, 

IP Rate: IP23,IP65,IP67,IP68

Our company produces LED full-color soft strips using light decay slow, high brightness imported chips as the light source. Using SOP-8 illusion driver IC as the driving source, RGB light beads have 256 levels of gray, which can send out different colors, and the product luminous brightness is the highest of similar light beads.

Cutting and welding are convenient and free and can be cut and welded along the above cut line to meet the customer’s requirement of various light bar lengths. 

The unique design of the FPC circuit board without hole drip glue does not leak glue, the board is simple and not easy to failure, using the soft FPCB board as the substrate, can be docking, bending, cutting, and any fixed concave and convex surface. 

Both ends of the humanized reserved joints, better and more convenient to use, long life, the average life of 40,000 hours.

 Control principle: an IC control an LED to form a circuit (a group), the controller through the control IC to control the circuit inside the FPCB, so as to control the LED strip change different effects; such as flashing, chase, jumping change, clockwise running horse, counterclockwise running horse, monochrome running horse, color-changing running horse, single chase from beginning to end, flowing water, simulation, lightning, etc.; this light strip change effect is not limited to the current controller built-in 128 kinds of effects, according to customer needs, their own preparation; row into the form of the screen can display text, letters, pictures, animation, etc.

Advantages

1. PWM refresh rate: 1.2kHz, transfer speed 800k bps

2. It comes in 1 meter per reel with a 3Pin female/male JST SM connector on both ends and separated Power / Ground Wires. Customized length is workable.

3.12V and 24V optional.

4.2 ounce PCB board with the double copper layer.

5. double sides membrane covers the PCB board. make sure the copper no drop from the PCB board

6. Flexible PCB material. ever 3 LEDcan be cut with 12V, every 6 LEDcan be cut with 24V,

7.90 LEDs per meter. 12V low voltage input, don’t over 13V, otherwise, you will destroy the entire strip.

8. Controller System： SD controller, DMX controller, Artnet, and so on. 

9. Installing: screw+silicon clip and 3M adhesive on the backside for sticky

Application

1, The polygon wall of the hotel, night club, KTV, and other places, the teardrop row ceiling is decorated to bring up the atmosphere, 

2, buildings, advertising walls, signboards, festivals, and other decorative areas of the city to beautify, brightening effect 

3, canopy and bridge arch edge, amusement parks, theaters, aircraft cockpit lighting 

4, home decoration lighting (stairs, door frame, bar, wine cooler, closet, TV cabinet, DIY home decoration.) 

5, car beauty (car body, car low…)

6, with iconic buildings building pavilion, bridges, parks, and other contours of the outline, embellished lighting effect