What is SMD5050 led strip light? And The Definitive Buying Guide to selecting SMD5050 LED Strip Light

Table of Contents

SMD5050 led strip light is a kind of flexible circuit board with full-color RGB SMD 5050 LEDs soldered on. The SMD stands for Surface Mounted Devices. 5050 means each led chip is 5mm wide and the pitch between 2 LEDs is also 5mm. So SMD5050 LEDs are much bigger than 3528 SMD LEDs. That’s the reason why 5050 SMD LEDs are much brighter than 3528 SMD LEDs. 

The circuit board of the SMD 5050 strip light is usually made of FPC or PCB. FPC is short for flexible printed circuits and PCB is short for the printed circuit board. 

The LED chips of SMD 5050 are usually packaged in Zener diodes to provide over-current protection, making them more secure to use. 

Because of its bright light, good color rendering, and low power consumption, SMD5050 LED strip light has become one of the most popular led lights in the market. 

1. SMD5050 led strip light is a type of LED that is becoming more and more popular for home lighting

2. It is a 5050 LED, which means it has three chips in each LED

3. This type of LED is brighter and has better color than the traditional 3528 LED

4. SMD5050 led strip light can be used for a variety of applications, including under-cabinet lighting, accent lighting, and task lighting

5. It is easy to install and can be cut to fit any space

Write a paragraph of content about SMD5050 led strip light is a type of LED that is becoming more and more popular for home lighting

If you are looking for a LED strip light that is bright, energy-saving, and has a long lifespan, then SMD5050 LED strip light is your best choice!

smd5050 led strip 2
smd5050 led strip

Does SMD5050 LED strip light color temperature change?

SMD5050 LED strip lights are available in a variety of colors, including warm white, cool white, and daylight. The color temperature of an LED is measured in Kelvin (K), and the lower the Kelvin value, the warmer the light will appear. Warm white LEDs have a color temperature of 3000K-4000K, while cool white LEDs have a color temperature of 4000K-5000K. Daylight LEDs have a color temperature of 5000K or higher. While the color temperature of an LED can vary depending on the manufacturer and type of LED, SMD5050 LEDs typically have a color temperature of 3000K-5000K. As a result, they can produce a range of colors, from warm white to cool white to daylight.

1. What is color temperature

Color temperature is a measure of the light emitted by an SMD5050 LED. The higher the color temperature, the whiter the light. The lower the color temperature, the more yellow the light. 

An SMD5050 LED with a color temperature of 6500K emits light that appears very white, while an SMD5050 LED with a color temperature of 3000K emits light that appears more yellow. 

Color temperature is measured in Kelvin (K), and most LEDs have a color temperature between 2500K and 7500K. 

The color temperature of an LED can be affected by many factors, including the type of phosphor used, the current density, and the junction temperature. 

 phosphor, current density, junction temperature.

2. The different types of color temperatures

 There are three types of color temperatures: 

 1) Warm White 

 2) Cool White 

 3) Daylight. 

 Each one of these color temperatures has its own unique benefits that can be best utilized in different settings. For example, warm white is often used in home settings as it creates a cozy and inviting ambiance. Meanwhile, cool white is ideal for commercial spaces as it creates a clean and crisp look. Lastly, daylight is perfect for task lighting as it simulates natural sunlight. 

 Ultimately, the type of color temperature you choose should be based on your personal preferences and the desired look and feel of the space.

cct strip 1
strip

3. How to change the color temperature on SMD5050 led strip lights

To change the color temperature on SMD5050 LED strip lights, you will need to use a controller that is compatible with your lights. Depending on the controller(DC 12V 24V 30A 360W 720W dimmer controller), you may be able to adjust the color temperature manually or through a mobile app. If you are using a controller with manual controls, simply find the button or knob that controls the color temperature and adjust it to your desired setting. If you are using a controller with a mobile app, open the app and navigate to the settings menu. From here, you should be able to find the color temperature settings and make changes as needed. Whether you are using manual controls or a mobile app, remember to save your settings before exiting so that they will remain in effect.

https://youtube.com/shorts/iVJ5aQv4ksk?feature=share

dimmer light switch
dimmer light switch

4. Advantages and disadvantages of changing the color temperature on SMD5050 led strip lights

Advantages: SMD5050 led strip lights have a wide range of color temperatures available. This can be useful in different situations. For example, if you want to create a cozy and inviting atmosphere, you can use a lower color temperature. If you want to create a more energizing and invigorating atmosphere, you can use a higher color temperature.

Disadvantages: One downside of changing the color temperature on SMD5050 led strip lights is that it can take some time to find the perfect setting. In addition, if you change the color temperature too often, it can eventually damage the lights.

5. Tips for choosing the right color temperature for your needs

smd5050 led strip
smd5050 led strip

Choosing the right color temperature for your needs doesn’t have to be complicated. Here are a few tips to help you make the best decision: 

1. Consider the purpose of the space. Are you looking to create a warm and inviting atmosphere or a brighter, more energizing environment? 

2. Take into account the existing lighting in the space. If you already have a lot of natural light, you may want to go with a cooler color temperature. 

3. Think about the other elements in the room. If you have a lot of white or neutral colors, a warmer light may be complementary. 

4. Ultimately, it’s important to choose a color temperature that makes you feel comfortable in the space. It should be inviting and conducive to whichever activity you’ll be using it for. 

With these guidelines in mind, finding the perfect color temperature for your needs will be a breeze!

How To Select SMD5050 Led Strip Light? (The Definitive Buying Guide)

There are a lot of different types and brands of LED strip lights on the market today. How do you know which one to choose? Here is a definitive guide to help you select the best SMD5050 LED strip light for your needs. 

smd5050 led strip (1)
smd5050 led strip

1. Decide on the purpose of the SMD5050 LED Strip Light

The purpose of the SMD5050 LED Strip Light is to provide consistent, evenly-lit light in a variety of settings. This light strip is popular for use in under-cabinet lighting, cove lighting, backlighting, and task lighting. Its simple design and easy installation make it a popular choice for DIY projects. The SMD5050 LED Strip Light is available in a variety of lengths, color temperatures, and brightness options to suit any need. its waterproof construction makes it ideal for use in both indoor and outdoor applications. With its wide range of uses and easy installation, the SMD5050 LED Strip Light is a versatile solution for any lighting need.

2. Consider the size of the space where the light will be used

When choosing LED strips, it’s important to consider the size of the space where the light will be used. For smaller areas, a strip that is 12 inches or less in width will suffice. However, for larger areas, a strip that is 24 inches or more in width is recommended. In addition, the number of LEDs per foot also plays a role in the brightness of the light. For example, a strip with 30 LEDs per foot will produce a brighter light than a strip with 20 LEDs per foot. As such, it’s important to take both the size of the space and the number of LEDs into account when choosing an LED strip.

3. Check what type of power supply is needed

12v 24v power supply of led strip light is common in the market. 12v is for 12 volts and 24v is for 24 volts. The type of power supply you need will depend on what type of LED strip lights you have. If you have 12-volt lights, then you will need a 12-volt power supply. If you have 24-volt lights, then you will need a 24-volt power supply. You can find these supplies at your local hardware store or online. Make sure to get the correct size power supply for your LED lights. Most 12-volt power supplies are rated for 20 amps and most 24-volt power supplies are rated for 10 amps. You may also need a separate power supply for each color of LED light you have.

4. Determine what color temperature is desired

Color temperature can play an important role in setting the tone of a space. In general, consider the color temperature of the light.

For a cool white light, look for an SMD5050 LED with a color temperature of 4000K-5000K.

And for a daylight light, look for an SMD5050 LED with a color temperature of 6000K or higher, while cooler color temperatures (around 6000K) can feel more clean and refreshing.

However, the desired color temperature will also depend on the specific application. For example, classrooms and offices often benefit from cooler color temperatures that help to promote concentration and vigilance, while living rooms and bedrooms might be more comfortable with a warmer color temperature that encourages relaxation. Ultimately, it’s important to consider the desired atmosphere before selecting a color temperature.

5. Select an appropriate length for the strip light

Depending on the length of the strip light, it will usually range from 3ft to 16ft. It is important to determine the length of the strip light because this will be a major factor in deciding how much power is required to operate it. The length of the strip also determines how much heat is generated and how long the LED will last. By determining the length of the strip, you can also calculate how many LED lights will be needed. In addition, the length will also determine where the strip should be placed in order to get the most benefit from it. Therefore, it is important to select an appropriate length for the strip light in order to get the most out of it.

smd5050 led strip (3)
smd5050 led strip (3)

6. Make sure that a waterproof sealant is included, if needed

When it comes to decorating your home with LED strips, it is important to make sure that a waterproof sealant is included. This will help to protect the strips from moisture and keep them looking their best. Sealants are available in a variety of colors, so you can choose one that matches the color of your LED strips. Once the sealant is applied, it will need to be allowed to dry for a few hours before you can turn on the power. However, the wait will be worth it as you enjoy your beautiful new decoration.

smd5050 led strip
smd5050 led strip

Conclusion

So, now that you know all there is to LED strip lights, it’s time for you to make a purchase. Remember to consider the factors we discussed and be sure to contact MSHLED with any questions. We want to ensure you have the best possible experience when selecting your new SMD5050 led strip light!

Facebook
Twitter
LinkedIn
Pinterest

Ask For A Quick Quote

We will contact you within 1 working day, please pay attention to the email with the suffix “@abrightled.com”

Sign up and get

25% Off

Join our mailing list to be the FIRST to know about Sales, New Products & More!

Let's Have A chat

Learn How We Helped 100 Top Brands Gain Success