WS2813 DC5V individually addressable LED Strip Dual signal,30LEDs/M,60LEDs/M,144LEDs/M
1. IC embedded, save space and cost
2. Each one controlled individually, show customized color effects
3. Cuttable for each LED
4. One LED broken, others still work
5. 5V input, support long connection no need re-connect to the power supply
17、Product size: 5000mm * 10/12mm * 3mm, can be customized according to customer requirements length
18、Packaging: 5 m/roll, 3m adhesive behind the back of the light bar, electrostatic bag package
19、Lighting color: full color with control system can be adjusted at will, can be prepared according to customer needs
20, our company can provide a supporting phantom color controller and 5V power supply, compatible with the market general full-color controller.
Two, The advantages of WS2813 smart led strip light
WS2813 full-color light bar is based on WS2812 and SK6812 on the basis of the upgrade, the function is fully upgraded and recognized.
1, all electronic components integrated with 5050 lamp beads, without the assistance of any other peripheral electronic components, constitute a complete external control pixel point while reducing the inversion of the false solder during product installation, resulting in bad;
2, serial cascade interface, dual signal line transmission, to achieve the function of intermittent transmission, in which a single pixel point damage will not cause its next pixel point normal light, the silk ho does not affect the overall effect;
3, intelligent reverse connection protection, product installation access 5V power supply in the case of reverse connection, will not cause damage to the lamp beads.
4, built-in signal shaping circuit, any one-pixel point receives signal after waveform shaping and then output, to ensure that the line waveform distortion will not accumulate.
5, each pixel point of the three primary colors can achieve 256 levels of brightness display, complete 16777216 colors of the full true color display port scan frequency 2KHz / s.
6、 no need to increase any signal amplification circuit when the transmission distance between any two points is not more than 5 meters.
7, when the refresh rate is 30 frames / s, the number of cascades is not less than 1024 points.
8, the data transmission speed of up to 800Kbps, strong color consistency of the lights, cost-effective.
9, rich light effects: can generate light effects such as flashing, chasing, running horse, flowing water, burst flash, gradient, meteor, jumping, clockwise running horse, counterclockwise running horse, single color running horse, color-changing running horse, single chase from beginning to end, simulated lightning, etc. The change effect of this light bar is not limited to the current controller built-in 300 kinds of effects, can be written according to customer needs, arranged in the form of a screen that can display text, letters, pictures, animations, etc..
10, soft and thin: the use of FPC (flexible circuit board) to do assembly circuit board, with SMD LED and the original assembly, so that the thickness of the product is only the thickness of a coin, accounting for little space, and can be cut at will, FPC material is soft, can be wound at will, can be moved at will in three-dimensional space and winding and will not break, suitable for irregular places, and the use of space is small, suitable for advertising in the decoration of the light-up, any combination of various patterns.
11, easy to install: each group of LED can form a circuit, can be cut off and welded along the above cut line at will to meet the needs of customers required by the length of various light bars, flexible and convenient cutting so that the construction operation is simple, the back paste 3M adhesive can be easily fixed, ultra-thin design, low-temperature light source, so that the product in the installation process of the choice of auxiliary materials with more flexible;
12, green environmental protection: with small power consumption, generating little heat, low loss, no radiation, maintenance-free, etc., is a new generation of green and environmentally friendly high-tech products.
13, long life: the average life of 50,000 hours, and installation, available to more than 7 years, a once-and-for-all choice.
Three, The scope of use.
1, urban contour lighting: buildings, villas, bridges, signboards, advertising light boxes, luminous fonts, Christmas landscape, and other decorations.
2, public lighting illumination: hospitals, villas, bridges, parks, gymnasiums, swimming pools, airports, subway stations, stations, etc.
3, home dark slot inset: door frame, bar, wine cabinet, closet, TV cabinet, ceiling dark grid, etc.
4, irregular design body decoration: shopping malls, hotels, nightclubs, KTV, and other places of polygonal walls, ceiling recesses, steps, and booths, etc..
5, car beauty: car body, car bottom, unicycle, balance car, etc.
6, shoe lights, toys, game machines, aquarium supplies, and entertainment products on the decoration.
Four, Application areas.
1, hotels, nightclubs, KTV, and other places of polygonal walls, teardrop rows of ceilings, up to decorate the atmosphere.
2, buildings, advertising walls, signboards, festivals, and other decorative areas of the city to beautify and brighten the effect.
3, stairs, door frames, bars, wine coolers, closets, TV cabinets, DIY home decorative lighting.
4, with iconic buildings building pavilions, bridges, parks, and other contours of the outline, play a decorative lighting effect.
5, lighting signals, such as a variety of luminous indication signs.
6, canopy and the edge of the bridge arch, amusement parks, theaters, aircraft cockpit lighting.
Notes
1, indoor installation: LED strip lights for indoor installation are relatively simple, as it does not have to withstand the wind and rain. Installation can be directly torn off the back of the strip 3m double-sided adhesive surface stickers, and then the strip is fixed in the need to install the place according to the flat on it. If you encounter a corner or the strip is too long and too short, an LED strip can be cut or welded separately at each group with scissors marking the tangent line.
2, outdoor installation: bare board strip is not waterproof, drip tape moisture-proof waterproof drop but can not be immersed in water, casing glue lamp with waterproof function can be immersed in water, outdoor installation because it will be subject to wind and rain, can not be fixed with 3M adhesive, so outdoor installation often use the slot fixed way, the need to cut and connect the place, the same method, and indoor installation, but need to be equipped with an additional waterproof adhesive to consolidate the connection point waterproof effect.
3, power supply connection method: LED illumination strip is generally a low-voltage strip (DC5V/12V/24V/36V), so you need to use a switching power supply, the size of the power supply according to the power of the LED strip, and the length of the connection to determine the conventional strip is 5 meters a volume, if the demand is in more than 5 meters, every 5 meters through the red and white wire to supplement the power circuit.
4, controller connection mode: LED running strip and RGB full-color strip need to use the controller to achieve the changing effect, and the control distance of each controller is different, in general, the control distance of the simple controller is 10 to 15 meters, the control distance of the remote controller is 15 to 30 meters distance. If the LED strip is connected at a longer distance and the controller cannot control that long, then a power amplifier is needed to tap it.